Monday, October 10, 2016

Samsung Galaxy Tab 2 10.1 GT-5110 Firmware

Samsung Galaxy Tab 2 10.1 GT-5110 Firmware
Product Code : CHO (Chile)
PDA Version : P5110XXDMA2




FIRMWARE







  1. Download Android 4.X.X Jelly Bean firmware in zip and extract to your desktop. Inside the extracted folder, you will see a file with .tar.md5 extension.
  2. Download Odin3_v3.04.zip and extract to your desktop.
  3. Make sure you have either Samsung USB Drivers or Kies installed on your computer. If not, download it and install now.
  4. Charge your Galaxy Tab 2 10.1 WiFi’s battery to at least 70% level.
  5. Backup your contacts, messages and other important data.
  6. Turn off your device and boot it into Download Mode: press and hold Volume Down+Power buttons together for a few seconds and press the Volume Up key when prompted to continue to Download Mode.
  7. Open Odin folder and run the Odin3 v3.04.exe program.
  8. Connect you Galaxy Tab to computer via the USB cable that came with your device.
  9. Wait till you see the ID:COM port turn blue and Added!!” text on Odin’s message box.
  10. Now click on PDA and select the .tar.md5 file found inside the extracted firmware zip package.
  11. Ensure that only “F. Reset Time” and “Auto Reboot” options are enabled on the Odin.
  12. Finally hit the Start button and wait for the installation to finish...done















No comments:

Post a Comment