OPPO R7 Lite Firmware

OPPO R7 Lite Firmware

FIRMWARE

OPPO R7 Lite Firmware

1. Just put firmware in directory of SD-card
2. Put phone in recovery mode, press vol - and power
3. Click english and click update via SD-card
4.Wait to finish update...Done


Problem can fix this phone:

1. Bootloop(Hang in Logo)
2.Ghostpush (Monkey Virus)
3.Unfortunately Error

Oppo 1201 (Neo 5) Firmware

FIRMWARE

Oppo 1201 (Neo 5) Firmware

1. Just put firmware in directory of SD-card
2. Put phone in recovery mode, press vol - and power
3. Click english and click update via SD-card
4.Wait to finish update...Done


Problem can fix this phone:

1. Bootloop(Hang in Logo)
2.Ghostpush (Monkey Virus)
3.Unfortunately Error

OPPO R831K ( Neo 3) Firmware

FIRMWARE

OPPO R831K ( Neo 3) Firmware

TOOLS

SP Flash Tools

 Procedure

1. Browse the scatter file from the firmware folder that you downloaded
2. You have to make sure that your device is totally turn off.
3. Click MOTA SIU Like...
4. Now click the Download button from the SP Flash Tool(if you see error try another version)
5. While holding either volume up or down, plug your device into the computer.
6. The process should start now.
7. Wait for the process to finish and do hard reset...Done

Problem can fix this phone:

1. Bootloop(Hang in Logo)
2.Ghostpush (Monkey Virus)
3.Unfortunately Error

OPPO Joy 3 (A11w) Firmware

OPPO Joy 3 (A11w) Firmware

FIRMWARE

 OPPO Joy 3 (A11w) Firmware

TOOLS

SP Flash Tools

Note: This firmware can flash in Miracle Box/Nck Box


 Procedure

1. Browse the scatter file from the firmware folder that you downloaded
2. You have to make sure that your device is totally turn off.
3. Now click the Download button from the SP Flash Tool(if you see error try another version)
4. While holding either volume up or down, plug your device into the computer.
5. The process should start now.
6. Wait for the process to finish...Done

Problem can fix this phone:

1. Bootloop(Hang in Logo)
2.Ghostpush (Monkey Virus)
3.Unfortunately Error

ZH&K Pioneer 2 Firmware

ZH&K Pioneer 2 Firmware

 FIRMWARE

ZH&K Pioneer 2 Firmware

TOOLS

SPD TOOLS

Samsung Galaxy Tab 2 10.1 GT-5110 Firmware

Samsung Galaxy Tab 2 10.1 GT-5110 Firmware
Product Code : CHO (Chile)
PDA Version : P5110XXDMA2

FIRMWARE

Samsung Galaxy Tab 2 10.1 GT-5110 Firmware

1. Download Android 4.X.X Jelly Bean firmware in zip and extract to your desktop. Inside the extracted folder, you will see a file with .tar.md5 extension.
2. Download Odin3_v3.04.zip and extract to your desktop.
3. Make sure you have either Samsung USB Drivers or Kies installed on your computer. If not, download it and install now.
4. Charge your Galaxy Tab 2 10.1 WiFi’s battery to at least 70% level.
5. Backup your contacts, messages and other important data.
6. Turn off your device and boot it into Download Mode: press and hold Volume Down+Power buttons together for a few seconds and press the Volume Up key when prompted to continue to Download Mode.
7. Open Odin folder and run the Odin3 v3.04.exe program.
8. Connect you Galaxy Tab to computer via the USB cable that came with your device.
9. Wait till you see the ID:COM port turn blue and “Added!!” text on Odin’s message box.
10. Now click on PDA and select the .tar.md5 file found inside the extracted firmware zip package.
11. Ensure that only “F. Reset Time” and “Auto Reboot” options are enabled on the Odin.
12. Finally hit the Start button and wait for the installation to finish...done

Lenovo Tab A3300-HV Firmware

Lenovo Tab A3300-HV Firmware

 

FIRMWARE

Lenovo Tab A3300-HV FIRMWARE

PASSWORD: a3300hvhvhvnovingsm

Lenovo Tab A3300-HV
Board id : A977_MB_PCB_6.0

Note: Back Up first before to proceed flashing..

Procedure

1. Open Miracle Box
2. Click write (Find the folder you save the firmware)
3. Wait the flashing...then done

Problem can fix this phone:

1. Bootloop(Hang in Logo)
2.Ghostpush (Monkey Virus)
3.Unfortunately Error